• S
  • M
  • T
  • W
  • T
  • F
  • S
  •  
  •  
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  •  
  •  
  •  

This month:

(0) events

Forums Home > Pro Site Help > Screw vacuum pump in metal smelting
Screw vacuum pump in metal smelting
Author Message
yanyan123
Image: Author Image
Joined: April 2018
Posts: 0
Location:
china,
Posted: July 22, 2020 4:37 AM

Screw vacuum pump in metal smelting

As we all know, in the metallurgical industry, high vacuum smelting is widely used for production or processing, especially in some high-end fields, the requirements of impurity content, oxygen, nitrogen and even hydrogen content of products are extremely strict, so high standards and requirements of vacuum system are required.

For example, vacuum distillation (the more advanced vacuum unit composed of dry screw vacuum pump and roots vacuum pump): in the distillation tank with vacuum degree higher than 1.3 PA, the reduction product is heated at 900-950 ° for a long time, and magnesium and magnesium chloride can volatilize and condense on the condenser.

This is mainly because of the following points:

1: It can greatly reduce the boiling point of the reduced product and make it easier to volatilize.

2: It can greatly increase the volatilization rate. The volatilization rates of different substances vary greatly under different vacuum degrees.

3: Prevent the production of Ti-Fe alloy or other compounds from affecting the product quality.

Roots Blowers

2BV series Liquid ring v...

Rotary Vane Vacuum Pump

 
Our members have made a total of 745 posts
We have 17539 registered members
The newest member is nehanehi
FORUM RULES
You are not logged in.
You cannot post replies

>