• S
  • M
  • T
  • W
  • T
  • F
  • S
  •  
  •  
  •  
  •  
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31

This month:

(0) events

Forums Home > Pro Site Help > Tube Furnace of Working Principle
Tube Furnace of Working Principle
Author Message
yanyan123
Image: Author Image
Joined: April 2018
Posts: 0
Location:
china,
Posted: April 8, 2019 4:16 AM

Tube Furnace of Working Principle
This product uses reliable integrated circuit, good working environment, anti-interference, Zui high temperature furnace shell temperature less than 50 C greatly improved the working environment, micro-computer program control, programmable 2 groups of 16 section curves, automatic heating/cooling, temperature control parameters and procedures can be modified in operation, flexible, convenient and simple operation. Temperature control accuracy: +1 C constant temperature accuracy: +1 C. The furnace materials are all made of imported Morgan fibers with high temperature, small heat storage and good heat preservation performance (energy saving effect is more than 80% of the old furnace). Reasonable structure, double-layer furnace sleeve inside and outside, air-cooled heat dissipation, can greatly shorten the test cycle.
This product is a necessary product for testing and testing in refractories, electronics, ceramics, metallurgy, machinery, building materials, special materials, new material development and other fields.
Tube furnace is widely used in ceramics, metallurgy, electronics, glass, chemical industry, machinery, refractories, new material development, special materials, building materials and other fields.
Principle of High Temperature Tube Furnace: After the thermocouple converts the temperature of the furnace into a voltage signal, it is added to the microcomputer temperature control regulator (as shown below). The regulator compares the signal with the programmable setting and outputs an adjustable signal. Then adjustable signal is used to control flip-flop and flip-flop is used to trigger voltage regulator to achieve the purpose of regulating the voltage and temperature of electric furnace.
ELECTRICAL RESISTANCE FU...
VACUUM GLASS ANNEALING F...
ELECTRIC WELL TYPE VACUU...
Our members have made a total of 728 posts
We have 15014 registered members
The newest member is Hatmaker
FORUM RULES
You are not logged in.
You cannot post replies

>